One Network Endpoint
Manage the pair through a single IPS-H1 connection.
Éducation
Créer des environnements d'apprentissage plus sûrs grâce à des innovations intelligentes
Haut-parleur à pavillon en réseau
IPS-H1Network Horn Speaker
IP66, PoE+, Paging & Talkback
An IP66-rated SIP horn speaker for paging and alerts in open, noisy spaces with built-in talkback, adaptive noise reduction, expansion speaker support, and PoE/PoE+ connectivity.
Project Your Message Across Open Spaces
Bring clear voice paging, emergency notifications, and two-way confirmations to factory yards, loading areas, parking facilities, and school grounds. The IPS-H1 Network Horn Speaker combines a high-efficiency horn design with IP66 protection for indoor and outdoor paging.
IP66 Protection
SIP & ONVIF
Two-Way Talkback
Ambient Noise Compensation
PoE / PoE+
1 + 1 Expansion
IPS-H1 + APS-H1
One Network Link. Two Horn Speakers.
Connect one APS-H1 analog extension horn to the IPS-H1 to add a second audio coverage point without an extra network connection or PoE switch port. The IPS-H1’s built-in amplifier drives both horns to play the same paging, alerts, and announcements—ideal for extending coverage across nearby areas.
IPS-H1 + APS-H1 · Front view
View Extension Connection
IPS-H1
Network speaker · PoE / PoE+ or DC
APS-H1
Analog extension · powered by IPS-H1
Shared Audio Output
Both horns reproduce the same content.
Flexible Power
PoE (2 × 5 W), PoE+ (2 × 8 W), or 24 V DC (2 × 20 W).
The APS-H1 connects to the IPS-H1 speaker output and is not an independent IP endpoint.
Paging & Talkback
Speak to the Site. Hear Back.
Go beyond one-way announcements. The IPS-H1 horn speaker's built-in microphone supports a two-way intercom, letting remote staff give instructions, hear on-site responses, and clarify next steps.
Réduction adaptative du bruit
Help reduce background noise picked up by the microphone for clearer talkback.
Acoustic Echo Cancellation
Help reduce echo during calls so conversations are easier to follow.
Wideband Audio Codec
G.722 HD voice for audio clarity and intelligibility on compatible calls.
Ambient Noise Compensation
Keep Paging Audible as Noise Levels Change
From quiet periods to busy activities, the IPS-H1 speaker's microphone can monitor and adapt volume to background noise levels, keeping announcements intelligible at all times.
-
Static Mode: Measure ambient noise before playback and set the volume compensation.
-
Dynamic Mode: Continuously adjust compensation during playback as noise levels change.
-
Adjustable Limits: Set minimum and maximum output levels to suit the location.
System Integration
Connect Paging with Your Existing Systems
Integrate the IPS-H1 PA horn speaker into your communication and security systems for live paging, two-way communication, and event-triggered audio.
ONVIF Integration: Connect to a compatible video management system to view the scene and deliver voice instructions remotely.
SIP Connectivity: Connect to ZYCOO IP Audio Center, CooVox, or a compatible third-party IP-PBX for paging and intercom.
Multicast & P2P: Use multicast for group paging and P2P for direct IP communication.
API & I/O Integration: Configure external triggers, audio playback, and relay actions for your application.
Installation & Management
Position, Connect, and Configure
Mount the IPS-H1 horn speaker on a wall or pole and adjust the horn angle toward your target area. Connect via PoE or PoE+ for power and data over one cable, or use an external 24V DC supply. Complete setup through the web interface, with auto-provisioning available to simplify deployment across multiple devices.
Built for Busy Sites and Outdoor Areas
Factories & Loading Areas
Deliver operational announcements and communicate with on-site staff.
Transportation Hubs
Guide passengers and relay announcements across platforms and terminal areas.
Parking Facilities
Provide remote instructions and voice guidance across parking areas.
School Grounds & Campuses
Extend announcements and important notifications to outdoor spaces.
IPS-H1
Spécifications
Key specifications for product selection. Refer to the datasheet for complete technical details.
| Spécification | IPS-H1 |
|---|---|
| Speaker Components | 1.5-inch midrange driver unit; Class-D amplifier |
| Réponse en fréquence | 400 Hz–8 kHz |
| Codecs audio | G.722, G.711 A-law, G.711 U-law, Opus |
| Sensibilité des haut-parleurs | 105 dB / 1 m / 1 W |
| Microphone | Built-in; sensitivity −38 ± 2 dB |
| Puissance absorbée | PoE / PoE+ (IEEE 802.3af/at); external DC 24 V / 2 A |
| Output Power · Standalone | 10 W (PoE); 16 W (PoE+); 20 W (DC) |
| Output Power · with APS-H1 | 2 × 5 W (PoE); 2 × 8 W (PoE+); 2 × 20 W (DC) |
| Protection Rating | IP66 |
| Protocoles | SIP (RFC 3261), HTTP, SSL, TCP/IP (TCP/UDP), RTP/RTCP, RTSP, MQTT, DNS, DHCP, ARP, ICMP, SSH, NTP/SNTP, PTP |
| Interfaces | 10/100 Mbps RJ45 network; RJ45 extension speaker; external DC input; 1 dry-contact output; 1 contact input |
| Dimensions / Weight | Ø218 × 265 mm / 1.5 kg (3.3 lb) |
| Température de fonctionnement | −20°C to +50°C (−4°F to +122°F) |
Audio output depends on power source and extension configuration. Specifications are subject to change.
Plan Your Horn Speaker Deployment
Tell us about your site, paging needs, and existing systems. Our team can help you plan speaker placement, power options, and integration.