Network Wall Mount Speaker
An all-in-one speaker that combines SIP paging, two-way communication, and adaptive volume control for indoor spaces.
The ZYCOO IPS-W1 SIP Network Wall Mount Speaker combines a Class-D amplifier, a two-way speaker system, and a built-in microphone in a wall-mounted unit with adjustable bracket. Deliver live paging, two-way talkback, emergency notifications, and background music across corridors, classrooms, and offices. Connect one APS-W1 extension speaker to expand coverage without adding another network endpoint.
Wall-mounted network audio for SIP paging, two-way talkback, and background music.
Download IPS-W1 Datasheet
Adds compatibility with the optional IPS-K-WM1 wireless microphone kit for announcements while moving around the site.
Download IPS-W1-R1 Datasheet
IPS-W1 + APS-W1
Add one matching APS-W1 extension speaker when an adjacent room or stretch of corridor needs the same audio. IPS-W1 can power the extension speaker and delivers audio to both speakers through one network endpoint.
IPS-W1 + APS-W1 · Front view
Use one network connection for the speaker pair.
Both speakers reproduce the same content.
PoE (2 × 5 W), PoE+ (2 × 8 W), or 24 V DC (2 × 16 W).
APS-W1 connects to the IPS-W1 speaker output and is not an independent IP endpoint.
Paging & Talkback
Make an instant SIP page through ZYCOO IP Audio Center or a compatible IP PBX. The IPS-W1 wall speaker's built-in microphone lets people near the speaker respond during a two-way call without adding a separate intercom endpoint.
Deliver live paging, announcements, and emergency alerts.
Support two-way communication through the built-in microphone.
G.722 wideband voice for clearer speech on compatible calls.
Réglage adaptatif du volume
Noise levels change throughout the day in corridors, lobbies, or shared workspaces. IPS-W1 monitors ambient noise and adjusts speaker output volume to help keep paging audible.
Configuration & Integration
Configure IPS-W1 through its browser-based interface and connect it to compatible communication, video management, and control systems.
Wall-Mount Design
Install the IPS-W1 wall-mounted speaker vertically or horizontally with the supplied wall bracket, then adjust the angle to direct audio toward the intended area. Connect via IEEE 802.3af/at PoE, or use external 24 V DC power with Ethernet for data.
Mounting Adjustment Range: Adjust up to 10° vertically and 90° left or right.
Dimensions & Weight: 240 × 180 × 150 mm · 2.8 kg.
Clear paging and announcements with focused wall-mount coverage.
Directional audio along linear indoor spaces.
Reliable paging and two-way communication.
Staff announcements and background music with adjustable direction.
IPS-W1 / IPS-W1-R1
Compare the two models and refer to the datasheets for complete technical details.
| Spécification | IPS-W1 | IPS-W1-R1 |
|---|---|---|
| Speaker Components | 5.25-inch woofer + 1.5-inch tweeter; Class-D amplifier | |
| Réponse en fréquence | 70 Hz–20 kHz | |
| Codecs audio | G.722, G.711 A-law, G.711 U-law, Opus | |
| Sensibilité des haut-parleurs | 85 dB/1 m/1 W | |
| Microphone | Built-in; sensitivity −38 ± 2 dB | |
| Puissance absorbée | PoE / PoE+ (IEEE 802.3af/at); external DC 24 V / 2 A | |
| Output Power · Standalone | 10 W (PoE); 16 W (PoE+ / DC) | |
| Output Power · with APS-W1 | 2 × 5 W (PoE); 2 × 8 W (PoE+); 2 × 16 W (DC) | |
| External Wireless Microphone | — | ✓ With IPS-K-WM1 |
| Protocoles | SIP, HTTP, SSL, TCP/IP (TCP/UDP), RTP/RTCP, RTSP, MQTT, DNS, DHCP, ARP, ICMP, SSH, NTP/SNTP, PTP | |
| Interfaces | 10/100 Mbps RJ45 network; RJ45 extension speaker; external DC input; 1 dry-contact output; 2 contact inputs | |
| Dimensions / Weight | 240 × 180 × 150 mm / 2.8 kg | |
| Température de fonctionnement | −20 °C to 50 °C (−4 °F to 122 °F) | |
IPS-K-WM1 is an optional accessory for IPS-W1-R1 only. Refer to the datasheets for full specifications and maximum SPL by power mode.
Talk to ZYCOO about IPS-W1, IPS-W1-R1, APS-W1 expansion, and project requirements.
